CX510SS – RedBack Lasers Ultimate Automatic Site Layout Laser
RedBack Lasers CX510SS is an auto levelling multi line laser level with outdoor receiver. Its the ultimate automatic site square and layout tool and also great for internal installation as well as general site levelling outside.
More details and videos below.
Automatic Site Layout Laser – Site Square Specialist
The RedBack Lasers Automatic Site Layout Laser CX510SS is a professional self levelling multi line laser tool. This laser features a horizontal laser line and four vertical laser lines at 90 degrees to each other. Plus, in addition, a ceiling cross and a plumb dot down. The most outstanding feature though of the CX510SS is its ability to set automatic site layout or site squares.
Automatic Site Layout Laser
The CX510SS includes a motorised base and a two way communicating line receiver LLR721, using the vertical lines in pulse mode, the rotating base hunts for the receiver (on its side) and locks onto its position. Once locked on simply pick up the receiver and find the second arm of the 90 degrees and your square is set, simple as that.
The CX510SS can be used either on its in-built motorised base on the ground or on any standard indoor or outdoor survey style tripod (HDF94, IET68) utilising the included adaptors, to use simply unlock the pendulum and it levels in seconds then select the required lines.
RedBack Lasers CX510SS comes with a two way communicating line receiver LLR721 and can be used on either vertical or horizontal lines when in pulse. The receiver has a staff bracket so it can be used much like a rotating laser receiver for site levelling.
Indoor Fit Out
The CX510SS still has all the indoor installation features of it brother the CX510 (no motorised base and two way receiver), so , it is ideal for levelling, vertical alignment, plumb and of course 90 degree square.
The CX510SS comes with the LLR721 receiver and clamp, Ni-mh rechargeable batteries and charger unit plus all the “AA” batteries required for the receiver and motorised base, Standard “AA” battery holder, Tripod adapters, Laser glasses and target all in a hard shell carry case.
This model is an ideal all round builders laser with 60m range outdoors using the receiver it covers most house blocks. Its also ideal for all types of indoor installation and fit out jobs requiring level, vertical alignment, plumb or 90 degree square. In addition it is also the ultimate layout tool.
The RedBack CX510SS comes with a 2 Year manufacturers warranty.
- Self Levelling
- Plumb Up and Down
- Horizontal Level
- 90 Degrees Square
- Vertical Alignment
- Ni-ml Batteries and charger
- “AA” Std Batteries for Motorised base and Receiver
- LLR721 Two Way Communication Line Receiver
- Tripod adapters
- Hard Shell Carry Case
- 2 Year RedBack Warranty
- Range – 60m with receiver, 20m visible lines (light dependent)
- Two Way communication, Receiver to Rotating base up to 30m (light dependent)
- Accuracy – +/- 2mm at 10m
- Laser Class – class 2 <1mW 635-670nm red
- Water Dust Resistance – IP54
RedBack Lasers service department also service and calibrate the following brands when possible; Topcon, Leica, Rugby, Geo Fennel, Spectra, Imex, Powerline, Tuf, Bosch, Dewalt, Laser Tec, General, Hilti, PLS, Fukuda, aLIne, Bince, Stabila, Stanley, sokkia,
|Dimensions||33 × 44 × 23 cm|
Brochure PDF can be viewed, printed and downloaded HERE
Instruction PDF can be viewed, printed and downloaded HERE