
A Premium Machine Receiver
360° reception & a massive 260mm sensor length. The MR825WD has ultra-bright LED height indicators, featuring Plumb Swing & Blade Tilt.
RedBack Machine Receiver with Wireless In-Cab Display & 800mm Magnetic Dipper Arm Pole
1 / 8
Out of stock — get notified
Leave your details and we'll let you know the moment it's back.
The MR825WD800P combines RedBack's premium wireless machine receiver with an 800mm magnetic dipper arm pole — purpose-built for mounting directly to an excavator's stick. Get wireless height readings, plumb swing, and blade tilt indications from the cab without stopping work.
The MR825WD800P is the ultimate earthmoving receiver kit for excavator operators who demand the best. It includes everything in the MR825WD kit, plus a heavy-duty 800mm magnetic dipper arm pole that mounts directly to the excavator stick using powerful magnets — no drilling or permanent modifications required.
The 800mm × 50mm OD steel pole positions the receiver at the ideal height on the dipper arm for optimal laser beam reception. An additional pair of clamp mounts is included to secure the receiver firmly to the pole. The existing magnet mounts are still included for direct attachment to machine bodies or buckets when needed — swap between mounting options in seconds.
The wireless in-cab display (WRD) means no cables to run between receiver and cabin — ideal for swapping the receiver between multiple machines on site. Combined with plumb swing indication for excavators, blade tilt indication for dozers and graders, three accuracy settings, IP67 weatherproofing, and a 40-hour battery, this is the most capable machine receiver kit in the RedBack range.
Using a Machine Receiver with Excavators & Earthmoving Equipment

360° reception & a massive 260mm sensor length. The MR825WD has ultra-bright LED height indicators, featuring Plumb Swing & Blade Tilt.

The MR825WD features a large Ni-MH rechargeable battery for up to 40 hours of continuous use. Includes mains charger for easy charging.

The MR825WD includes a pair of both magnetic mounts and adjustable clamp mounts. Simply screw your required mounts onto the receiver and attach to your equipment.

The wireless In-Cab Display keeps height readings right in front of you. Allows you to have your laser and receiver above the machine cabin to avoid shadowing — and swap between machines in seconds with no cables to run.

The MR825WD features Blade Tilt Mode for bulldozers & graders. The LEDs display the level of the blade between left & right on the receiver's LED display or In-Cab Display.

Excavator Mode on the MR825WD indicates if a boom arm is tilted away from or towards the machine cabin. The LEDs flash quickly when tilted away, flash slowly when tilted towards, and illuminate solid when plumb to ground.

The included 800mm × 50mm OD steel pole fastens directly to your excavator stick using ultra-strong magnets — no drilling, no welding, no permanent modifications. The rigid steel tube keeps the receiver perfectly aligned for accurate, repeatable height readings, and the additional clamp mount set attaches the receiver securely to the pole. Swap between pole-mount, direct-magnet and clamp-mount in seconds.
| Sensor Length | 250mm Long |
|---|---|
| Sensor Coverage | 360° |
| Compatible lasers | Rotating lasers |
| Accuracy Settings | ± 5mm, ± 10mm, ± 20mm |
| Maximum Range | ~200m Radius with Class 3 Red Beam Lasers |
|---|---|
| Water & Dust Resistance | IP67 |
| Battery Type | Internal Ni-MH Rechargeable Battery |
| Warranty | 2 Year |
Machine receivers help you achieve maximum efficiency while earthmoving. Get height readings from the comfort of your cabin — no more jumping out to check your staff.
1 review
Only verified customers can leave a review
Order 45707 Thanks for the option for review The system is great and well priced compared to TOPCON The in cab receiver needs a back light on the screen with the arrows as it is very hard to see when trimming to the millimetre and can’t be done quickly as you can’t see the arrows properly Has it got a light I haven’t found yet ? Also one of the little magnets pulled out of the magnet mount on The Bucket when I removed so not sure if it’s going to last Any info on this would be great Regards Ashley Ward Maximum Drainage
Clamp Mounts [Pair] to suit MR7 Series & MR825 Machine Receivers
$150.00
Add
Magnet Mounts [Pair] to suit MR7 Series & MR825 Machine Receivers
$150.00
Add
CASE DRedBack Lasers carry case shell for DGL, MR and PL ranges
$179.00
Out of stock
MRP-A800B | Adjustable 800–1400mm Machine Receiver Pole with Bolt-On Bracket
$690.00
Add
MRP-A800W | Adjustable 800–1400mm Machine Receiver Pole with Weld-On Bracket
$690.00
Add
MRP-800MC | 800mm Machine Receiver Pole with Magnet & Clamp Bracket
$499.00
Add
A genuine "No-BS" warranty - no signup or regular calibration/service required to get the full term.
Machine Mount Receivers are pretty easy to look after!
The best advice we can give is to make sure your receiver is fully dry before storing it back in the case for an extended period of time. Water vapours can ingress inside places where water itself can't, which can cause condensation to build inside the unit.
Avoid getting the magnets stuck together unless you like a challenge!
Machine Receivers don't require calibration. If you need any service/repairs done you can contact us for options.
Good service and easy process
TThicks3 weeks agoGreat service and great laser. Got a 3-axis laser level and after dropping it from the second floor onto concrete one of the glass housings was damaged but the Redback team was super responsive and sorted a replacement part within a few days. Just good service and a good product.
TThomas Andersen3 weeks agoGood product for the price, amazing service, had a problem with my receiver, called and explained the problem, a new one arrived 3 days later in the mail, these guys are the best.....
AALLAN P.3 weeks agoGood quality, good price, I used it straight away with my Redback laser and everything works well.
AAdrian4 weeks agoTop service.
SSteven BAUER1 month agoEasy purchase fast delivery
KKoby Boer1 month agoJust what I needed - accurate, easy to use
TTrav Mcmahon3 months agoJack and the crew have been one of the best business to deal with. For three years I've had no issue with their products but when I had a fault they were brilliant to deal with on the phone and had me bask working within days, with was great considering I first call on a Friday afternoon.
RRob Thompson4 months agoThe help i got from Tim and the guys was second to none.....they returned my calls immediately and kept me in the loop looking for what I needed.....my purchase was expressed post so didn't hold me up with construction.....I wouldn't buy laser equipment from anyone else.....thanks guys
DDamian Brown4 months agoThankyou to the team at Redback Lasers. The customer service is outstanding and their after sales service is the best i have experienced in a long time. Because of this i will be a repeat customer in the future. To Jack and the rest of the staff at Redback, keep up the great work as it is definitely appreciated.