Laser Machine Control System with Single Receiver & Hydraulic Control Unit

RedBack MCR900 Laser Machine Control System with Single Receiver. Want to automate your Land Plane or Box Blade, with the Redback Lasers MCR900 Machine Control System you can. The MCR900 offers autonomous control of your implement adjusting to the laser you have set through the single receiver and solenoid controller which adjusts your hydraulic ram. This works in conjunction with your laser which is supplied separately and often this is paired with the Redback Lasers DGL1010GM Laser. Your implement must be fitted with a Hydraulic block with a solenoid control valve. We can help you with the hydraulic requirements to marry into this system.  Great for Land Planes, Box Blades, Dozers and more.

This machine control system comes with

• The in-cab control unit and mount.  This allows you to select between manual or automation control and adjust between fine and coarse operation
• The Receiver and connection cable.  To be attached to a pole on your machine
• The solenoid switches and cable.  To operate the solenoid control valve

What you will need

• You will need a Red Beam Rotating Laser Level
• A pole on your implement to attach the receiver to.
• Live hydraulic flow to the implement with a hydraulic block with a solenoid control valve
• A flow dampener on the hydraulic block so you can restrict your hydraulic flow.

Ideally, it would be best if you had a hydraulic flow rate of 40 Lpm or less.

The RedBack Single Receiver system MCR900 is ideal for Land Planes, Box Blades, Dozers and more.

If you are wanting more information regarding this or requiring a quote on a full setup please give our office a call on 1800 769 858

Installation example on a Landplane and Tractor.

Specifications

Receiver Specifications

• Degree of Protection – IP66
• Detection radius – 400m
• Receiving Angle – 360°
• Detection Accuracy – ±5mm
• Detection Window – 210mm
• Operating Temperature – -10℃～+50℃
• Power Supply – DC 12V/24V
• Size – 158x135x298mm
• Weight – 3kg

Control Unit Specifications

• Output Compatibility – Proportional Time (PT) Valve Control
• Control – manual/auto conversion
• Valve Compatibility – Single proportional time (PT) valve control
• Maximum output current – 10A
• Horizontal LED display – green
• High/Low LEDs – red
• Show – High brightness LED indication
• Weight – 2.8kg
• Operating temperature – -10℃～+50℃
• Degree of Protection – IP56
• Voltage – DC12V
• Size – 160x120x105mm

Warranty – 2 Year RedBack Warrant on RedBack Lasers components supplied

Also available is a dual receiver version MCR910 for depth and angle of cut machine automation HERE.