
Detect Your Laser Anywhere
360° reception & a massive 250mm sensor length. The MR710 has 5 ultra-bright LED height indicators (2 above, Level, 2 below) for instant visual feedback — even in bright sunlight.
RedBack Machine Mounted Receiver & 800mm Magnetic Dipper Arm Pole
1 / 8
Out of stock — get notified
Leave your details and we'll let you know the moment it's back.
The MR710+800POLE combines RedBack's popular MR710 machine receiver with an 800mm magnetic mounting pole — designed to mount directly onto an excavator's dipper arm for accurate height readings from the cab.
The MR710+800POLE gives excavator operators everything they need for efficient, accurate machine control — without ever leaving the cab. Building on the proven MR710 receiver, this kit adds an 800mm magnetic dipper arm pole that clamps magnetically onto the excavator stick, positioning the receiver at the ideal height for consistent laser beam reception.
The 800mm × 50mm OD steel pole attaches securely to the dipper arm via powerful magnets — no drilling, no welding, no modifications to your machine. An additional pair of clamp mounts is included to fix the receiver to the pole. When working on other machines or needing to go direct to the machine body, the magnet mounts are already included for a quick switchover.
Five ultra-bright LED indicators give the operator instant visual feedback at a glance — even in bright sunlight — and the IP66 rated housing means it handles dust, dirt, and water on any Australian worksite. With 40 hours of battery life and dual-voltage charging, it’ll run a full week of days before needing a charge.
MR710/D Machine Receiver Overview

360° reception & a massive 250mm sensor length. The MR710 has 5 ultra-bright LED height indicators (2 above, Level, 2 below) for instant visual feedback — even in bright sunlight.

The MR710 features a large Ni-MH rechargeable battery for up to 40 hours of continuous use. Includes mains charger for easy charging.

The MR710 includes a pair of both magnetic mounts and adjustable clamp mounts. Simply screw your required mount onto the receiver and attach to your equipment.

The included 800mm × 50mm OD steel pole fastens directly to your excavator stick using ultra-strong magnets — no drilling, no welding, no permanent modifications. The rigid steel tube keeps the receiver perfectly aligned for accurate, repeatable height readings, and the additional clamp mount set attaches the receiver securely to the pole. Swap between pole-mount, direct-magnet and clamp-mount in seconds.
| Sensor Length | 250mm |
|---|---|
| Sensor Bands | 4 Sensor Windows - 1 on each corner |
| Compatible lasers | Rotating lasers |
| Accuracy Settings | Fine 3-5mm, Coarse 5-25mm |
|---|---|
| Water & Dust Resistance | IP66 |
| Battery | Internal Ni-MH Rechargeable Battery |
Machine receivers help you achieve maximum efficiency while earthmoving. Get height readings from the comfort of your cabin — no more jumping out to check your staff.
Only verified customers can leave a review
No written reviews yet.
Magnet Mounts [Pair] to suit MR7 Series & MR825 Machine Receivers
$150.00
Add
Clamp Mounts [Pair] to suit MR7 Series & MR825 Machine Receivers
$150.00
Add
CASE DRedBack Lasers carry case shell for DGL, MR and PL ranges
$179.00
Out of stock
MRP-A800B | Adjustable 800–1400mm Machine Receiver Pole with Bolt-On Bracket
$690.00
Add
MRP-A800W | Adjustable 800–1400mm Machine Receiver Pole with Weld-On Bracket
$690.00
Add
MRP-800MC | 800mm Machine Receiver Pole with Magnet & Clamp Bracket
$499.00
Add
A genuine "No-BS" warranty - no signup or regular calibration/service required to get the full term.
Machine Mount Receivers are pretty easy to look after!
The best advice we can give is to make sure your receiver is fully dry before storing it back in the case for an extended period of time. Water vapours can ingress inside places where water itself can't, which can cause condensation to build inside the unit.
Avoid getting the magnets stuck together unless you like a challenge!
Machine Receivers don't require calibration. If you need any service/repairs done you can contact us for options.
Good service and easy process
TThicks3 weeks agoGreat service and great laser. Got a 3-axis laser level and after dropping it from the second floor onto concrete one of the glass housings was damaged but the Redback team was super responsive and sorted a replacement part within a few days. Just good service and a good product.
TThomas Andersen3 weeks agoGood product for the price, amazing service, had a problem with my receiver, called and explained the problem, a new one arrived 3 days later in the mail, these guys are the best.....
AALLAN P.3 weeks agoGood quality, good price, I used it straight away with my Redback laser and everything works well.
AAdrian4 weeks agoTop service.
SSteven BAUER1 month agoEasy purchase fast delivery
KKoby Boer1 month agoJust what I needed - accurate, easy to use
TTrav Mcmahon3 months agoJack and the crew have been one of the best business to deal with. For three years I've had no issue with their products but when I had a fault they were brilliant to deal with on the phone and had me bask working within days, with was great considering I first call on a Friday afternoon.
RRob Thompson4 months agoThe help i got from Tim and the guys was second to none.....they returned my calls immediately and kept me in the loop looking for what I needed.....my purchase was expressed post so didn't hold me up with construction.....I wouldn't buy laser equipment from anyone else.....thanks guys
DDamian Brown4 months agoThankyou to the team at Redback Lasers. The customer service is outstanding and their after sales service is the best i have experienced in a long time. Because of this i will be a repeat customer in the future. To Jack and the rest of the staff at Redback, keep up the great work as it is definitely appreciated.