MR706 – RedBack Machine Mounted Receiver – Magnetic Mount
RedBack Lasers MR706 machine receiver with magnetic mounting.
Compare with other Machine Receivers
- MR706D – Magnetic Mount – In Cab Repeater Unit
- MR708 – Clamp Mount
- MR708D – Clamp Mount – In-Cab Repeater Unit
- MR825WD – Clamp & Magnetic Mount – Wireless Incab – Tilt & Swing
To Buy the MR706 at $999.00 inc GST scroll down to the “Add to Cart” button below.
Product description
Machine Mounted Receiver MR706
RedBack Lasers MR706 machine mounted receiver with magnetic mount. The MR706 is designed to work with most red rotating laser levels. It features magnetic mounting for attaching to a machine boom or blade/bucket.
The MR706 features 360 degrees of reception and can pick up a laser anywhere within its massive 250mm reception window. The receiver will flash slowly it indicates when the laser moves outside of the reception window and shows the height at the laser was last detected. On the receiver are 5 extremely bright clusters of LED lights indicating the height of the laser. Both above and below level as well as for level.
The RedBack Lasers MR706 has an internal Ni-mh battery that can be charged with the included mains charging unit. It can also operate on a 12 or 24V system with the included cable with crocodile clips. Note though on a 12V system the receiver will still need a mains charge from time to time as the 12V system will only top up the internal battery not fully charge it.
Machine receivers are ideal for all types of earthmoving and groundworks, excavating for level and grades, and can be installed on a number of machines.
Features
- 360 Degree Sensors for all-round reception
- Large 250mm Reception Window
- Laser Received Height Flash Indicator
- Fine and Coarse Accuracy settings (3-5mm to 5-25mm)
- IP66 water and dust-tight
- Internal Ni-Mh battery and Mains Charger, cable for 12V and 24V operation.
- Operates with Red Beam Rotating Lasers.
- Two Year Warranty
Also available with Clamp Mount MR708 HERE
RedBack Lasers service department also service and calibrate the following brands when possible; Topcon, Leica, Rugby, Geo Fennel, Spectra, Imex, Powerline, Tuf, Bosch, Dewalt, Laser Tec, General, Hilti, PLS, Fukuda, aLIne, Bince, Stabila, Stanley, sokkia, Bear, Apache
Additional information
Weight | 7.1 kg |
---|---|
Dimensions | 40 × 51 × 29 cm |
DOWNLOADS
Brochure PDF can be viewed, printed and downloaded HERE
Instruction PDF can be viewed, printed and downloaded HERE
1 review for MR706 – RedBack Machine Mounted Receiver – Magnetic Mount
You may also like…
MR706D – RedBack Machine Receiver with In-Cab – Magnetic Mount
$1,149.00 inc GST
Grant Long (verified owner) –
Tim kept me updated. Great service thanks heaps