MR708D – RedBack Machine Receiver with In-Cab – Clamp Mount
RedBack Lasers MR708D machine receiver with clamp mounting and in-cab repeater.
Clamp Mount Machine Receiver with In-Cab
RedBack Lasers MR708D machine mounted receiver with clamp mount and in-cab repeater unit. The MR708 is designed to work with most red rotating laser levels it features clamp mounting. This attaches to a rod (not supplied) on either a boom or blade/bucket which makes it extremely secure. The MR708 features 360 degrees of reception and can pick up a laser anywhere within its massive 250mm reception window. When laser moves out of this reception window the receiver will flash slowly indicating the laser height the laser was last detected. On the receiver are 5 extremely bright clusters of LED lights indicating the height of the laser both above and below level as well as on level. The RedBack Lasers MR708 has an internal Ni-mh battery that can be charged with the included mains charging unit. It can also operate on a 12 or 24V system with the included cable with crocodile clips. Note though, on a 12V system the receiver will still need a mains charge from time to time as the 12V system will only top up the internal battery not fully charge it.
The RedBack Lasers MR708D pack comes also with an in cab repeater unit and cables. The in cab repeater unit duplicates the display given on the receiver itself and so when placing the repeater unit inside the cab the height indication lights are easier to see. The MR708 can be used without the in cab repeater if desired.
Machine receivers are ideal for all types of earth moving, excavating and ground works for level and grades and can be installed on a number of machines, backhoes, graders etc.
- 360 Degree Sensors for all round reception
- Large 250mm Reception Window
- Laser Received Height Flash Indicator
- Fine and Coarse Accuracy settings (3-5mm to 5-25mm)
- IP66 water and dust tight
- Internal Ni-Mh battery and Mains Charger, cable for 12V and 24V operation.
- MRD In-Cab Repeater Unit and Cables
- Operates with Red Beam Rotating Lasers.
- Two Year Warranty
Also available as a magnetic mount MR706D HERE
RedBack Lasers service department also service and calibrate the following brands when possible; Topcon, Leica, Rugby, Geo Fennel, Spectra, Imex, Powerline, Tuf, Bosch, Dewalt, Laser Tec, General, Hilti, PLS, Fukuda, aLIne, Bince, Stabila, Stanley, sokkia, Bear, Apache,
|Dimensions||40 × 51 × 29 cm|
Brochure PDF can be viewed, printed and downloaded HERE
Instruction PDF can be viewed, printed and downloaded HERE
Be the first to review “MR708D – RedBack Machine Receiver with In-Cab – Clamp Mount”
You may also like…
MR825WD – RedBack Machine Receiver with Wireless In-Cab$2,799.00 inc GST