GD12 – Grade Dial Plate – Make a manual mode laser into a grade laser 5/8 Survey Thread
GD12 Grade Dial Plate suitable for lasers with manual levelling mode both pendulum based and electronic. GD12 fits onto any standard 5/8″ 11tpi flat top tripod and can accommodate lasers with the same standard survey thread.
Out of stock
Grade Dial Plate
The GD12 Grade Dial Plate by RedBack Lasers allows any laser level with a manual mode to set a grade.
Simply screw the GD12 onto a flat top tripod and level using the integrated bubble vial. Then attach the laser onto the plate and select manual mode. You can then slope off the laser using the knob dial to a grade as indicated on the scale up to 90 degrees.
Make from cast metal and steel this is a sturdy piece of kit ideal for dam walls and other large grade setting were fine precision is not essential.
For an example, a RedBack Laser you can use with this plate would be an EGL624 HERE
Below is a video showing the plate in use with an EGL624GM model
|Dimensions||17 × 7 × 14 cm|