LR720 – RedBack Millimeter display Receiver for Rotating Lasers reads up to 45millimetre
The RedBack LR720 is the latest in receiver technology with millimeter from level display and custom level options. Displays height measurements plus and minus 45 millimetres. Suitable for rotating laser both red and green beam.
Millimeter Display Receiver displays measurement 45 millimetre above and below level
The RedBack Lasers millimetre LR720 is a heavy-duty Millimeter Display Receiver for both RED and GREEN rotating laser levels. The LR720 features a millimeter display and extended 100mm reception window, dual LCD back lit displays and three LED displays.
The RedBack LR720 provides a millimetre reading of up to 45mm above and 45mm below the level point and counts down the millimeters as you get closer to the level. You can also set a custom zero-point based on the existing position of the laser beam if you wish.
The LR720 has 3 accuracy settings for level +/-1mm, 5mm and 9mm level bands. The LR720 comes with a heavy-duty staff clamp and also has magnets built into the casing for mounting on steelwork etc.
One of the biggest advantages of this Millimeter Receiver over a standard one is when performing coarse levelling tasks. For example, If all you need is to be within 20mm (+/- 10mm) of level then just keep an eye on the reading and make sure it never hits 11mm either above or below.
The LR720 millimetre detector is powered by 4 “AA” batteries which are included when you purchase this receiver.
The RedBack LR720 is suitable for most visible rotating lasers and picks up both Red & Green.
Looking for a replacement Staff Clamp for the LR720? You can find that HERE
RedBack Lasers service department also service and calibrate the following brands when possible; Topcon, Leica, Rugby, Geo Fennel, Spectra, Imex, Powerline, Tuf, Bosch, Dewalt, Laser Tec, General, Hilti, PLS, Fukuda, aLIne, Bince, Stabila, Stanley, sokkia, Bear, Apache
|Dimensions||25 × 12 × 7 cm|
Instruction PDF can be viewed, printed and downloaded HERE