LR715 – RedBack Dual LCD Display Rotating Laser Receiver – Red Beam

Dual LCD Display Rotating Laser Receiver

The RedBack Lasers LR715 rotating laser receiver features 2 large LCD displays, one at the front and one at the back.  These provide an indication of the rotating laser beam being above or below level.  This display is progressive , in that, it indicates as you move the receiver closer to the level line height.  A single line is shown and a solid tone sounded when the receiver is on level with the laser.  The LR715 features 3 separate audible sounds for above, below and on level which can be turned off if required.

Accuracy

The RedBack LR715 also features an accuracy setting, default is fine at 1mm level band, mid 3mm and coarse is a 5mm level band.  So, for fine work keep the receiver on the default 1mm accuracy setting and coarse levelling select either the 3mm or 5mm level band.

The receiver has an auto power off function.  This powers down the receiver after 10 minutes of inactivity, thus, saving battery.

The LR715 is powered by a 9V battery (included) and comes with a durable staff clamp.

The receiver made tough with durable plastic and rubber to protect from damage when dropped.  Working in rain is not a problem as the receiver is also weather sealed.

RedBack Lasers LR715 also features magnets on the top and side handy for when you are levelling steel frame work or suspended ceilings.

The LR715 receiver is ideal for any red rotating laser level and is supplied with most RedBack Rotating Lasers.  Including; EL614, EGL624, DGL3000, DGL1010VS plus many more.

For a millimeter display receiver check out the RedBack LR720 millimeter receiver HERE

RedBack Lasers service department also service and calibrate the following brands when possible; Topcon, Leica, Rugby, Geo Fennel, Spectra, Imex, Powerline, Tuf, Bosch, Dewalt, Laser Tec, General, Hilti, PLS, Fukuda, aLIne, Bince, Stabila, Stanley, sokkia, Bear, Apache