
Measure Without Touching the Point
Aim at a building corner or a point across a drain and record it from where you stand. FJD rates laser points at 3 cm within 5 m.
Laser Rover, UHF Base & E600
Some accessories shown are optional extras. See what's included
This bundle includes
Complete Your Kit
FJD's top laser rover with your own base. The FJD Trion V10Li measures points you can't put a pole on with its green laser and cameras, and the V1t base station kit sends it RTK corrections over a 2 W UHF radio where there's no mobile coverage. The kit includes FJD's E600 controller with Trion Survey ready to use.
This kit puts the FJD Trion V10Li laser rover kit and the V1t base station kit together.
Aim the Class 2M green laser at a building corner or a point across a drain and record it from where you stand: FJD rates laser points at 3 cm within 5 m and 5 cm within 15 m. Photo measuring picks many points from a single capture.
The V10Li has its own 4G for NTRIP corrections where there’s coverage (a paid network, or Geoscience Australia’s free AUSCORS streams). Where there isn’t, the base sends corrections over its 2 W UHF radio, and fJD rates the link at about 5 km in normal conditions (3–8 km depending on terrain and interference) and up to 11 km at 2 W in good, open country. A UHF base transmitting in the 400 MHz band needs an ACMA apparatus licence.
A tripod for the base and a survey pole for the rover: add our HDF94 heavy-duty tripod and the FJD carbon fibre pole below. The base screws onto any 5/8-inch survey thread; for setting up exactly over a survey mark, use a tribrach.
FJD Trion V10L laser RTK for non-contact measurement

Aim at a building corner or a point across a drain and record it from where you stand. FJD rates laser points at 3 cm within 5 m.

The laser guides you onto the design point, and EasyFix zooms and locks onto the target automatically.

The Class 2M green laser shows in sunlight, and the night-vision camera keeps the view usable in poor light.

The second-generation IMU needs no calibration and handles pole tilt up to 60°.


The base sends RTK corrections to your rover over UHF radio, so you can work where there's no mobile signal and pay no correction subscription.

FJD rates the 2 W radio at about 5 km in normal conditions and up to 11 km in good, open country. Antenna height makes the biggest difference.

Up to 10 hours at 1 W from the internal battery, or run it from an external 9–32 V supply.

| RTK Accuracy | Horizontal 8 mm + 1 ppm; vertical 15 mm + 1 ppm (RMS) |
|---|---|
| Laser Measuring Accuracy | 3 cm within 5 m; 4 cm within 10 m; 5 cm within 15 m |
| Laser | Class 2M green, 520 nm; 0–80 m range (rated to 15 m) |
| Photo Measuring | Typically 3 cm at 2–15 m; up to 30 s capture |
| Tilt Compensation | 0–60°, calibration-free; 8 mm + 0.6 mm per degree (RMS) |
| GNSS | 1408 channels; GPS, GLONASS, BeiDou, Galileo, QZSS, NavIC, SBAS |
| RTK Initialisation | Under 5 s; over 99.9% reliability |
| Cameras | Dual 2 MP; starlight-grade night vision, global shutter |
| 4G Modem | Built in (Nano-SIM) |
| Built-in UHF Radio | 2 W; 410–470 / 902–928 MHz |
|---|---|
| Radio Range | Typically 6–12 km; up to 16 km in ideal conditions |
| Battery | 7,000 mAh; 15 h rover / 10 h base / over 25 h static; 30 W USB-C PD fast charge (Australian wall charger not included) |
| External Power | 9–28 V DC |
| Toughness | IP68; 2 m pole drop; -35 °C to +65 °C |
| Size and Weight | Ø130 × 83 mm; about 980 g |
| Screen | 1.41-inch colour OLED |
| Memory | 32 GB |
| Controller | FJD E600 (included), with Trion Survey ready to use |

| RTK Accuracy | Horizontal 8 mm + 1 ppm; vertical 15 mm + 1 ppm (RMS) |
|---|---|
| GNSS | 1408 channels; GPS, BeiDou, GLONASS, Galileo, QZSS, NavIC, SBAS |
| Internal UHF Radio | 1 or 2 W; 410–470 / 902–928 MHz |
| Radio Range | About 5 km typical (3–8 km); up to 11 km in good conditions |
| Radio Protocols | LoRa, TRIMTALK, TRIMMARK III, T450S, TRANSEOT, Satel 3AS 4FSK |
| Correction Formats | Output RTCM 3.x; input CMR, RTCM 2.x, RTCM 3.x |
| Update Rate | 1, 2 or 5 Hz |
| Battery | 6,500 mAh; up to 10 h as a base at 1 W; 30 W USB-C PD fast charge (Australian wall charger not included) |
|---|---|
| External Power | 9–32 V DC (aviation plug) |
| Toughness | IP67; 1.5 m drop; -30 °C to +60 °C |
| Size and Weight | 162 × 86 mm; 1,070 g |
| Memory | 32 GB |
| Mount | 5/8-inch survey thread; extension rod and tribrach plate included |
| Setup | From your FJD rover's E600 controller in Trion Survey |
Only verified customers can leave a review
No written reviews yet.
Good service and easy process
TThicks2 weeks agoGreat service and great laser. Got a 3-axis laser level and after dropping it from the second floor onto concrete one of the glass housings was damaged but the Redback team was super responsive and sorted a replacement part within a few days. Just good service and a good product.
TThomas Andersen2 weeks agoGood product for the price, amazing service, had a problem with my receiver, called and explained the problem, a new one arrived 3 days later in the mail, these guys are the best.....
AALLAN P.3 weeks agoGood quality, good price, I used it straight away with my Redback laser and everything works well.
AAdrian4 weeks agoTop service.
SSteven BAUER1 month agoEasy purchase fast delivery
KKoby Boer1 month agoJust what I needed - accurate, easy to use
TTrav Mcmahon3 months agoJack and the crew have been one of the best business to deal with. For three years I've had no issue with their products but when I had a fault they were brilliant to deal with on the phone and had me bask working within days, with was great considering I first call on a Friday afternoon.
RRob Thompson3 months agoThe help i got from Tim and the guys was second to none.....they returned my calls immediately and kept me in the loop looking for what I needed.....my purchase was expressed post so didn't hold me up with construction.....I wouldn't buy laser equipment from anyone else.....thanks guys
JJay Saunders7 months agoRedback lasers sent the product fast which saw me receive the product in no time. I also received a free upgrade to a lr730 which I was stoked about. The LR730 works a treat for getting heights set out precisely