
Your Own Base, No Coverage Needed
The base sends RTK corrections to your rover over UHF radio, so you can work where there's no mobile signal and pay no correction subscription.
UHF Radio for Base-and-Rover RTK
Some accessories shown are optional extras. See what's included
Complete Your Kit
The FJD Trion V1t base station kit lets you run your own RTK base. It sends centimetre corrections to your FJD Trion rover over a 2 W UHF radio, so you can work where there's no mobile coverage and pay no correction subscription. You set it up from your rover's E600 controller.
A base station sits on a fixed point and sends RTK corrections to your rover by radio. It’s the answer on farms, rural blocks and remote sites where mobile coverage is patchy.
Pair it with the FJD Trion V1t, V10a or V10Li rover kit. You start the base from the rover’s E600 controller in Trion Survey, so there’s no second controller to buy.
The internal radio transmits at 1 or 2 W on 410–470 MHz or 902–928 MHz and talks the common protocols (TRIMTALK, TRIMMARK III, Satel and others). FJD rates the link at about 5 km in normal conditions (3–8 km depending on terrain and interference) and up to 11 km at 2 W in good, open country. Antenna height and a clear line of sight make the biggest difference to range. A UHF base transmitting in the 400 MHz band needs an ACMA apparatus licence.
The 6,500 mAh battery runs the base for up to 10 hours at 1 W. For longer, run it from an external battery or mains supply through its 9–32 V DC input. It charges over USB-C PD (Australian wall charger not included).
It’s IP67 sealed, drop-tested to 1.5 m and works from -30 °C to +60 °C.
A tripod: the base screws onto any 5/8-inch survey thread, like our HDF94 heavy-duty tripod below. For setting up exactly over a survey mark, use a tribrach.
FJD Trion V1 Series RTK receivers

The base sends RTK corrections to your rover over UHF radio, so you can work where there's no mobile signal and pay no correction subscription.

FJD rates the 2 W radio at about 5 km in normal conditions and up to 11 km in good, open country. Antenna height makes the biggest difference.

Up to 10 hours at 1 W from the internal battery, or run it from an external 9–32 V supply.
| RTK Accuracy | Horizontal 8 mm + 1 ppm; vertical 15 mm + 1 ppm (RMS) |
|---|---|
| GNSS | 1408 channels; GPS, BeiDou, GLONASS, Galileo, QZSS, NavIC, SBAS |
| Internal UHF Radio | 1 or 2 W; 410–470 / 902–928 MHz |
| Radio Range | About 5 km typical (3–8 km); up to 11 km in good conditions |
| Radio Protocols | LoRa, TRIMTALK, TRIMMARK III, T450S, TRANSEOT, Satel 3AS 4FSK |
| Correction Formats | Output RTCM 3.x; input CMR, RTCM 2.x, RTCM 3.x |
| Update Rate | 1, 2 or 5 Hz |
| Battery | 6,500 mAh; up to 10 h as a base at 1 W; 30 W USB-C PD fast charge (Australian wall charger not included) |
|---|---|
| External Power | 9–32 V DC (aviation plug) |
| Toughness | IP67; 1.5 m drop; -30 °C to +60 °C |
| Size and Weight | 162 × 86 mm; 1,070 g |
| Memory | 32 GB |
| Mount | 5/8-inch survey thread; extension rod and tribrach plate included |
| Setup | From your FJD rover's E600 controller in Trion Survey |
Only verified customers can leave a review
No written reviews yet.
Good service and easy process
TThicks2 weeks agoGreat service and great laser. Got a 3-axis laser level and after dropping it from the second floor onto concrete one of the glass housings was damaged but the Redback team was super responsive and sorted a replacement part within a few days. Just good service and a good product.
TThomas Andersen2 weeks agoGood product for the price, amazing service, had a problem with my receiver, called and explained the problem, a new one arrived 3 days later in the mail, these guys are the best.....
AALLAN P.3 weeks agoGood quality, good price, I used it straight away with my Redback laser and everything works well.
AAdrian4 weeks agoTop service.
SSteven BAUER1 month agoEasy purchase fast delivery
KKoby Boer1 month agoJust what I needed - accurate, easy to use
TTrav Mcmahon3 months agoJack and the crew have been one of the best business to deal with. For three years I've had no issue with their products but when I had a fault they were brilliant to deal with on the phone and had me bask working within days, with was great considering I first call on a Friday afternoon.
RRob Thompson3 months agoThe help i got from Tim and the guys was second to none.....they returned my calls immediately and kept me in the loop looking for what I needed.....my purchase was expressed post so didn't hold me up with construction.....I wouldn't buy laser equipment from anyone else.....thanks guys
JJay Saunders7 months agoRedback lasers sent the product fast which saw me receive the product in no time. I also received a free upgrade to a lr730 which I was stoked about. The LR730 works a treat for getting heights set out precisely