Fencing Lasers – Build fences straighter, faster.

Yes. The entire kit is designed for single-person operation. Set-up is easy, aligning the laser to match the scope is a 1-button press, and marking out posts with the receiver is a walk. If you’re struggling to get help on fencing jobs, this is the kit.

400m (Standard kit) or 500m (Premium kit) of fencing in one direction from a strainer post. Put the kit in the middle of the line and you can get 800-1000m total from one set-up, though finding a good middle point takes a bit longer. Range varies with conditions – the further you push, the more intermittent the receiver gets. Fencing a longer run? You can sight a target through the 9× scope from over 1km away – work the fence in 400-500m legs and re-set the laser along the line as you go. Re-setting is quick.

Both work. In-line is easiest when you’re first learning the kit – laser and scope both aim where the fenceline will be. The only downside: if you want to ram in each post as you go, rammed posts can block the receiver from detecting the laser. In that case, set the laser at an offset to the scope so the laser and receiver have clear line of sight even with posts in the ground.

Yes – this is one of the biggest advantages over stringlines, sighter wires and other methods. The laser shoots a full 360° vertical line, so as long as the receiver has line of sight of the laser, it’ll detect the beam. That’s up the top of a hill or down the bottom of a gully. Perfect for fencing country that’s not flat.

The EGL624GM, GREEN624GM and DGL1010GM all work with the FVAK64 Fencing & Vertical Alignment Kit. If you already own one of those lasers, you only need the FVAK64 add-on rather than a full kit. Call us on 1800 769 858 and we’ll put the right combo together for you.

Both kits ship with the same FVAK64 fencing add-on, 9× zoom scope, fencing receiver and 240HDF tripod and staff – the difference is the laser inside. The Standard kit runs the EGL624GM: 400m marking radius, 1.5mm @ 20m accuracy, Class 2 red beam and dual grade via slope remote. The Premium kit runs the DGL1010GM: 500m radius, +/- 1mm @ 20m, a brighter Class 3 red beam and digital grade to +/- 10.000% dual axis for site work. See the full comparison above.

Both fencing kits ship with red beam lasers – and for fencing that’s no compromise. Fence alignment is worked through the receiver, and the receiver reads red and green equally well outdoors. Green diodes earn their premium indoors where the beam is seen by eye, not on a fenceline. If you already own the green GREEN624GM, it’s FVAK64-compatible – the add-on kit works exactly the same way.

Yes – that’s the point of the range. The same EGL624GM or DGL1010GM that aligns your fence works as a standard rotating laser the rest of the year: horizontal levelling with the receiver, and grade setting for falls and drainage – both models are grade lasers too. One tool, two jobs.

Both work. Tripod, post bracket, or the laser slid over the top of a strainer – the kit mounts and moves multiple ways to suit the run in front of you. Both complete kits include the 240HDF heavy duty tripod and 2.4m telescopic staff, and the FVAK64 can clamp straight onto a strainer post.