
Just Point and Measure
Aim the green laser at the mark and record it from where you stand. FJD rates laser points at 2.5 cm within 3 m with up to 30° of tilt.
Handheld Laser RTK Receiver (BYO Android Device)
Some accessories shown are optional extras. See what's included
Network corrections only. The V4e Pro gets its RTK corrections from an NTRIP service (a paid network, or Geoscience Australia's free AUSCORS) over your phone's mobile data, so you need mobile coverage on site. It can't be used with a base station.
Complete Your Kit
The FJD Trion V4e Pro is a 320 g handheld GNSS RTK receiver with tilt compensation and a green laser. Aim it at a peg, a post or a corner and record the point from where you stand, with no pole to level. This is the receiver on its own: bring your own Android phone or tablet and run FJD's Trion Survey app, which passes the receiver network (NTRIP) corrections over your phone's mobile data. It works with network (NTRIP) corrections only and can't be used with a base station.
The V4e Pro suits builders, landscapers, fencers and farmers who need to pick up and set out points without carrying a full survey kit.
The built-in IMU handles tilt up to 60°, so you don’t hold the receiver plumb over the point. Aim the green laser at a peg, a post or a corner and record it from where you stand. FJD rates laser points at 2.5 cm within 3 m with up to 30° of tilt, and 3.5 cm at 60°. For stakeout, follow the beam to the design point and the app confirms when you’re on it.
The bright Class 2M green laser stays visible in sunlight and ranges from 3 cm out to 60 m. For conventional pole work, screw the V4e Pro onto a survey pole with the supplied adapter.
The V4e Pro has no screen, modem or radio of its own. It pairs over Bluetooth with FJD’s Trion Survey app on your Android phone or tablet. Trion Survey runs on Android only, not iPhone. The app is free to download and starts with a trial; for the full features after that, you’ll need a permanent Trion Survey licence for your device. We can supply one, so just ask.
Trion Survey connects to an NTRIP correction service over your phone’s mobile data and passes the corrections to the receiver. You’ll need mobile coverage on site and an NTRIP login: a paid network subscription, or Geoscience Australia’s free AUSCORS streams. The V4e Pro doesn’t work off a base station. Keep your phone within about 5 m of the receiver.
Choose the FJD Trion V4e Pro + E600 Controller Kit. FJD’s rugged E600 Android controller has Trion Survey ready to go and its own 4G for corrections, so there’s no licence to buy.
At 320 g and 182 mm long, it fits in a jacket pocket. It’s rated IP67, survives 1.2 m drops and runs about 12 hours on a charge (less if the laser and tilt are on all day), then recharges in 3 hours or less over USB-C.
FJD Trion V4e Pro product overview

Aim the green laser at the mark and record it from where you stand. FJD rates laser points at 2.5 cm within 3 m with up to 30° of tilt.

Pairs over Bluetooth with FJD's Trion Survey app on your Android phone or tablet.

At 320 g it fits in a jacket pocket. IP67, drop-rated to 1.2 m and about 12 hours per charge.
| RTK Accuracy | Horizontal 8 mm + 1 ppm; vertical 15 mm + 1 ppm (RMS) |
|---|---|
| Tilt Compensation | 0–60°: 2.5 cm at 30°, 3.5 cm at 60° |
| Laser Point Accuracy | 2.5 cm (30° tilt) or 3.5 cm (60°) within 3 m |
| Laser | Class 2M green; 0.03–60 m range; ±3 mm ranging |
| GNSS | 1408 channels; GPS, GLONASS, BeiDou, Galileo, QZSS, SBAS |
| RTK Initialisation | Under 5 s; over 99.9% reliability |
| Update Rate | 1, 2, 5, 10 or 20 Hz |
| Corrections | NTRIP (RTCM 2.3, RTCM 3.x, CMR) through your device; no base station support |
|---|---|
| Software | FJD Trion Survey for Android (free trial; permanent licence available separately) |
| Bluetooth | 4.2 dual-mode; about 5 m range |
| Battery | 5,000 mAh; about 12 h (less with the laser and tilt running all the time); charges in 3 h or less over USB-C from any USB charger or power bank (wall plug not included) |
| Toughness | IP67; survives 1.2 m drops; -20 °C to +60 °C |
| Size and Weight | 182 × 53 × 53 mm; 320 g |
| Mount | 1/4-inch thread; screw adapter for survey poles included |
Only verified customers can leave a review
No written reviews yet.
Good service and easy process
TThicks2 weeks agoGreat service and great laser. Got a 3-axis laser level and after dropping it from the second floor onto concrete one of the glass housings was damaged but the Redback team was super responsive and sorted a replacement part within a few days. Just good service and a good product.
TThomas Andersen2 weeks agoGood product for the price, amazing service, had a problem with my receiver, called and explained the problem, a new one arrived 3 days later in the mail, these guys are the best.....
AALLAN P.3 weeks agoGood quality, good price, I used it straight away with my Redback laser and everything works well.
AAdrian4 weeks agoTop service.
SSteven BAUER1 month agoEasy purchase fast delivery
KKoby Boer1 month agoJust what I needed - accurate, easy to use
TTrav Mcmahon3 months agoJack and the crew have been one of the best business to deal with. For three years I've had no issue with their products but when I had a fault they were brilliant to deal with on the phone and had me bask working within days, with was great considering I first call on a Friday afternoon.
RRob Thompson3 months agoThe help i got from Tim and the guys was second to none.....they returned my calls immediately and kept me in the loop looking for what I needed.....my purchase was expressed post so didn't hold me up with construction.....I wouldn't buy laser equipment from anyone else.....thanks guys
JJay Saunders7 months agoRedback lasers sent the product fast which saw me receive the product in no time. I also received a free upgrade to a lr730 which I was stoked about. The LR730 works a treat for getting heights set out precisely